NIKKI will exhibit at EMO MILANO 2027 from 4 to 8 October 2027 at Fieramilano in Rho, Milan. EMO alternates between Hannover and Milan, and 2027 is Milan’s turn.
European machine builders have been among NIKKI’s steadier customers for years, in Germany and Italy above all, and EMO is where most of those conversations begin. The stand will carry all four locking series in metric threads from M5 x 0.5 to M260 x 4: 30° flank locking for general machinery, radial locking where axial length is tight, axial locking for nuts secured from the front face, and the ultra-uniform locking series for spindles and ball screws.
Material is DIN 42CrMo4 (JIS SCM440) at HRC 28-32 with threads to ISO 4H. Grinding grade holds maximum axial run-out to 0.002 mm and precision-turning grade 0.005 mm at lower cost, and the grade is legible in the model code rather than confirmed by email. RoHS and SVHC-free certification and an SGS test report are available for parts shipping into the EU.
Bring a competitor part code or a shaft drawing and we will cross-reference it at the stand.